Friday, April 19, 2024
HomeTechiPad Unavailable Message? Hacks to Fix It!

iPad Unavailable Message? Hacks to Fix It!

Hello, my wonderful readers! Without the passcode, you can not access your iPad, which is not a pleasant experience. Luckily, there are several options for dealing with this iPad unavailable issue: With iTunes or iCloud, Apple makes it possible to get around the unavailable screen. With the update to iPadOS 15.2, the iPads also get a new “Erase iPad” option on the screen that allows you to restore the device to its default settings. A third-party utility is another option to get past the issue and get back into your iPad. In this blog, we will discuss the iPad unavailable message in detail. We will also talk about how to deal with the iPad unavailable screen.

What does iPad unavailable mean?

iPad Unavailable indicates that your iPad has been locked to prevent unauthorized use because you repeatedly entered the wrong passcode on it. You might see one of the following messages depending on how frequently you enter the passcode:

  • iPad Unavailable; try again in 1 minute.
  • iPad Unavailable; try again in 5 minutes.
  • iPad Unavailable; try again in 15 minutes.
  • iPad Unavailable; try again in 1 hour.

You must wait a longer period for the more incorrect codes you enter. The iPad Unavailable screen without a timer will eventually appear if you keep entering the wrong passcode. That indicates that your iPad is completely locked and that there is no way to unlock it without wiping it clean.

Reasons Why iPad Unavailable on Screen Shown

  • If the iPad was left locked for a long time and the swipe button is not functioning
  • If a software update has not been applied to the iPad
  • If you try too many different, unsuccessful passwords

Erasing iPad On The Screen

As with fixing the iPhone Unavailable screen, the first solution you should try is the Apple feature. If you forget your iPad’s passcode, Apple now lets you erase the device directly from iPadOS 15.2 and later. You might see the Erase iPad option when your iPad says it is unavailable. You can reset your iPad without a password by clicking that button and logging in with your Apple ID account. The iPad can then be configured as if it were brand new. 

Check that your iPad is connected to a network and that you can recall your Apple ID account information before you begin. If so, proceed to the steps below to unlock the inaccessible iPad.

  • Enter the incorrect passcode on your iPad until the iPad Unavailable screen appears.
  • Select the Erase iPad option from the drop-down menu.
  • Tap Erase iPad once more after reviewing the information.
  • For the iPad to be erased, enter your Apple ID passcode.

Depending on your iPad’s settings, you might only sometimes see the Erase iPad option alongside the unavailable message. 

How to Fix iPad Unavailable with iTunes

You can use iTunes to unlock a locked iPhone, reset an iPad without a password, or, in this case, repair iPad Unavailable. Upgrade the firmware on your iPadOS device using iTunes (or Finder on a Mac) to restore your iPhone. You can restore your iPad to its default settings and delete all its data and settings, including the lock screen.

  • Switch off your iPad.
  • Enter the iPad into recovery mode.
  • Wait for iTunes to detect your iPad after connecting it to your computer.
  • When iTunes informs you something is wrong with your device, select Restore from the prompt.

How to Fix iPad Unavailable via iCloud

To get rid of the iPad Unavailable screen, use iCloud’s Find My Device service. Your iPad will be deleted without a passcode if you use Find My iPhone’s Erase iPad option. You can do this to delete every piece of data and configuration on your iPadOS device, including the lock screen options. As a result, you can use this method to unlock the iPad that is not working.

  • On your computer or another mobile device, go to iCloud.com.
  • Log in using the Apple ID that you use to unlock the iPad.
  • Select your iPad and click Find iPhone. 
  • To confirm, select Erase iPad and click Erase iPad once more.
  • Set up your iPad as new after the data erasure process is finished.

Before you reset your device

If you have forgotten your passcode, you can erase and reset your device without using a computer by entering your Apple ID and password.

  • You must have a device that runs iOS 15.2 or iPadOS 15.2 or later.
  • You must be connected to a cellular or Wi-Fi network with your iPhone, iPad, or iPod touch.
  • You will need your Apple ID and password, which you created when you first set up your device.
  • If you restart your device after seeing “Security Lockout” on the Lock Screen, you will be unable to connect to a Wi-Fi network until your device is unlocked. If you have active service, your cellular device will reconnect to a cellular network.

How to unlock iPad unavailable?

If you are using an eSIM, contact your carrier first and request a QR code to re-enable your eSIM.

  • Try entering your passcode five times from the Lock Screen of your device before the “[Device] Unavailable” screen appears and your device prompts you to try again later.
  • Continue entering your passcode as long as you can until the “Security Lockout” screen appears, and the Erase [Device] option is available in the bottom right corner.
  • To confirm, tap Erase [Device] once more after selecting Erase [Device].
  • To sign out of your Apple ID on your device, enter the associated password.
  • To permanently delete all of your data and settings, select Erase [Device].
  • Follow the onscreen prompts to restart your device, set it up from scratch, restore your data and settings from a backup, and create a new passcode.
  • You can reset your device using a computer if you cannot follow these instructions.

Having an active cellular or Wi-Fi connection and having previously enabled Find My is required to access the “Security Lockout” screen. Depending on how you previously configured your device, it will either erase itself after ten unsuccessful attempts to enter your password or display Security Lockout and the choice to Erase [Device] without a timer. 

Reset iPad passcode

Your iPad will be rendered inoperable if you repeatedly enter the incorrect passcode on the iPad Lock Screen, according to an alert. The only way to put your iPad in recovery mode if you can not remember your passcode when you try again is by using a computer. You can re-set up your iPad after this process deletes all your data and settings, including your passcode.

You can use the backup to restore your data and settings after wiping your iPad. If you did not back up your iPad, you can configure it as a new device and download any iCloud data you have.

Make sure that you have a computer

A PC or Mac is needed for this process. Use a PC with Windows 10 or later and iTunes installed if you are using one. To connect your iPad to the computer, you will also need the cable that was included with it or an alternative cable that works.

Turn off your iPad

If your iPad is connected to the computer, unplug it.

Turn off your iPad by following the instructions for your iPad model:

  • If your iPad lacks a Home button, hold down one of the volume buttons and the top button simultaneously until the power off slider appears.
  • If your iPad has a Home button, hold it down until the power off slider appears.

Drag the slider to turn off your iPad, then wait a minute to ensure that it is completely turned off.

Put your iPad in recovery mode

Prepare by locating the button on your iPad that you will need to hold in the following step:

  • iPad models without a Home button use the top button.
  • The Home button is used on iPad models that have one.

Press and hold the appropriate iPad button while immediately connecting your iPad to the computer. Don’t let go of the button.

Hold the button down until you see the recovery mode screen on your iPad, then release it.

If you see the passcode screen, shut down your iPad and restart it.

Restore your iPad

Find your iPad in the Finder or iTunes on the computer to which it is connected.

When you are given the option to Restore or Update, select Restore. Your computer downloads iPad software and begins the restoration process. If the download takes longer than 15 minutes and your device exits the recovery mode screen, wait for the download to complete before turning off your iPad and restarting.

Wait for the process to complete.  

Disconnect your iPad from the computer before setting it up and using it. 

Conclusion to iPad says unavailable

The iPad unavailable on screen was shown to an Apple user at least once! In this blog, we discussed why the iPad unavailable screen shows up on your device! We went into detail about the iPad problem and gave several solutions!

Read similar blogs by clicking here.

David Scott
David Scott
Digital Marketing Specialist .
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments

Izzi Казино онлайн казино казино x мобильді нұсқасы on Instagram and Facebook Video Download Made Easy with ssyoutube.com
Temporada 2022-2023 on CamPhish
2017 Grammy Outfits on Meesho Supplier Panel: Register Now!
React JS Training in Bangalore on Best Online Learning Platforms in India
DigiSec Technologies | Digital Marketing agency in Melbourne on Buy your favourite Mobile on EMI
亚洲A∨精品无码一区二区观看 on Restaurant Scheduling 101 For Better Business Performance

Write For Us